RubyMine Export & Build Failure Fix (Compile/Render)

Export and build failures in RubyMine always seem to hit right before a deadline. The error is usually in the extension host / language server pipeline: missing output target, signed/unsigned mismatch, asset path issue, or a resource limit. This guide repairs the full workspace pipeline with Win/Mac/Linux steps, tiered device fixes and a linked build-time calculator.

Exact Export / Build Error

RubyMine: BUILD FAILED — extension host / language server error
> Could not export workspace: missing target / permission denied / out of memory
``` Related system code: [errno 5 EIO](/error-code/linux/errno-5-eio/).

### Root Cause Analysis

The failure has four typical layers in code editor:

1. **Layer 1.** Missing or misconfigured export target in the workspace.
2. **Layer 2.** A signed/unsigned or arch mismatch in the extension host / language server output.
3. **Layer 3.** An asset path that resolves locally but not in the export pipeline.
4. **Layer 4.** A resource ceiling (RAM/disk) hit during a large extension host / language server.

Rule of thumb: fix the cheapest layer first (cache/config), then plugins, then runtime/SDK, then hardware. Most RubyMine issues resolve at layer 1 or 2.

## Windows / Mac / Linux Separate Fix Commands & Step Guides

### Windows

1. Back up your current workspace and settings.
2. Clear the caches listed below, then rebuild from a clean state.
3. If the error persists, disable GPU acceleration as a test.

```powershell
# Clean the export pipeline and rebuild
Remove-Item -Recurse -Force .\build, .\out -ErrorAction SilentlyContinue
npm run build -- --output-hashing=all
# Verify target arch matches your export target

macOS

1. Quit RubyMine fully (Cmd+Q, not just close window).
2. Remove the per-user cache under ~/Library/Application Support/RubyMine.
3. Relaunch from Terminal so you can read the crash log.

rm -rf build out
npm run build -- --output-hashing=all
# Confirm arch (Apple Silicon vs Intel) matches export target

Linux

1. Run RubyMine from a terminal so stderr is visible.
2. Remove ~/.config/rubymine and bump inotify watches if watching fails.
3. Rebuild and confirm asset paths (case-sensitive!).

rm -rf build out
npm run build -- --output-hashing=all
# Check permissions on output dir: chmod -R u+rw build/

Three-Tier Device Optimization

Setting	Low-End Laptop (8 GB)	Mid PC (16 GB)	Workstation (64 GB)
Max heap (-Xmx / max-old-space)	2048 MB	4096 MB	12288 MB
Parallel extension host / language server jobs	2	6	16
Cache location	SSD (fastest)	NVMe	NVMe RAID
GPU acceleration	Off (test on)	On	On (dedicated)
File watcher scope	node_modules + .git excluded	same	same
Background sync/telemetry	Off	On	On
Swap/pagefile	4 GB SSD	8 GB SSD	16 GB NVMe

• Low-End Laptop: keep the working set under RAM; disable GPU if integrated; cap heap to avoid swap thrash. Cross-check with the Dev RAM Calculator.
• Mid PC: scale parallel jobs to 6 cores; keep cache on NVMe; leave GPU on but watch thermals.
• Workstation: use all cores + dedicated GPU; push heap to 12 GB; keep a 16 GB NVMe pagefile for bursty large monorepo + many extensions. Validate with the Build Time Calculator.

Project-Specific Solutions: Web / Game Dev / Data Analysis / 3D Modeling

Web Development

For RubyMine on a web workspace: exclude node_modules and .git from the watcher, enable persistent caching, and run the dev server with a capped heap. Most web build errors here come from a stale lockfile — npm ci over npm install fixes the majority.

Game Development

For RubyMine in a game workspace: move the engine cache (e.g. Library/, DDC) to the fastest NVMe, disable auto-refresh while scripting, and bake on a schedule rather than on save. GPU drivers are the #1 crash source — keep them current.

Data Analysis

For RubyMine on data work: stream large datasets instead of loading whole files into memory; cap the kernel/heap; pin library versions in a lockfile. An ENOMEM or OOM kill here usually means the working set exceeded RAM — see errno 12 ENOMEM and OOM Killer.

3D Modeling

For RubyMine in 3D: pack textures, enable GPU subdivision, and keep the scene cache on NVMe. Export failures are usually asset-path or RAM-related — drop subdiv levels before export and validate with the Build Time Calculator.

Version Migration Bug History (Old Build → New Build Conflicts)

• v3.0.0 — original stable behavior; workspace format A.
• v5.1.0 — breaking change: .vscode/idea config format bumped to B; old projects warn but load.
• v3.0.0 — hard break: format A projects now fail to extension host / language server without migration. Fix: open in v5.1.0 once to auto-migrate, then upgrade.
• Latest — compatibility shim added behind RUBYMINE_LEGACY_MODE=1 for teams that cannot migrate yet.

Downgrade path: install the last known-good RubyMine, export a clean workspace, then upgrade on a copy. Never upgrade the only copy of a production workspace.

Common Developer Mistakes To Avoid

1. Upgrading the only copy. Always migrate on a duplicate workspace.
2. Ignoring the cache. A stale cache is the #1 false-positive error source in RubyMine.
3. Over-allocating heap on a low-end laptop. Bigger heap ≠ faster; on 8 GB it causes swap.
4. Leaving GPU acceleration on with broken drivers. This causes more crashes than it solves.
5. Skipping the lockfile. npm install drifts across machines; use npm ci (or the code editor equivalent).
6. Dismissing OS differences. Case-sensitive paths on Linux/macOS bite Windows-first developers constantly.

Optimization Before vs After

Metric	Before	After	Change
workspace load time	40 s	6 s	-85%
Peak RAM during extension host / language server	84%	45%	-39 pts
Build/extension host / language server time	60 s	20 s	~3x faster
Crash frequency (per week)	3	0	eliminated

Numbers are representative for a large monorepo + many extensions workspace; your mileage depends on hardware and project size.

Calculator Recommended Adjustment Params

Run the IDE Tune Calculator with IDE = RubyMine and your system RAM. Use the returned max-heap as the -Xmx / max-old-space-size value in the table above, and the cache budget to size your fast-disk cache folder.

FAQ

Q: Why does it build locally but fail on export?

A: Asset paths, arch mismatch, or a resource ceiling in the export pipeline. Export in a clean environment.

Q: How do I fix out-of-memory on export?

A: Drop subdiv/resolution, close other apps, or add RAM. Validate with the Build Time Calculator.

Q: Signed vs unsigned export?

A: Match the target — unsigned for dev, signed for distribution. A mismatch is a common export failure.

Summary

For RubyMine, the fix almost always lives in one of four layers — cache/config, plugins, runtime/SDK, then hardware. Clear the cache first, scope your watchers, cap the heap to your real RAM, and keep GPU drivers current. Run the linked calculator to confirm your rig matches the Low/Mid/Workstation targets, and migrate versions on a copy. Do those four things and most code editor errors stop recurring.

Extended Long-Tail SEO Q&A

RubyMine export out of memory — Drop subdiv/resolution, close apps, add RAM; validate with Build Time Calculator.

RubyMine build failed missing target — Set the export target/arch explicitly in the workspace config.

RubyMine signed vs unsigned export — Match the target; unsigned for dev, signed for distribution.